ansible-role-mumble/templates/murmur/mumble-server.ini.j2

330 lines
13 KiB
Django/Jinja

{{ ansible_managed | comment(decoration="; ") }}
; Murmur configuration file.
;
; General notes:
; * Settings in this file are default settings and many of them can be overridden
; with virtual server specific configuration via the Ice or DBus interface.
; * Due to the way this configuration file is read some rules have to be
; followed when specifying variable values (as in variable = value):
; * Make sure to quote the value when using commas in strings or passwords.
; NOT variable = super,secret BUT variable = "super,secret"
; * Make sure to escape special characters like '\' or '"' correctly
; NOT variable = """ BUT variable = "\""
; NOT regex = \w* BUT regex = \\w*
; Path to database. If blank, will search for
; murmur.sqlite in default locations or create it if not found.
database={{ murmur_database.path | to_json }}
; Murmur defaults to using SQLite with its default rollback journal.
; In some situations, using SQLite's write-ahead log (WAL) can be
; advantageous.
; If you encounter slowdowns when moving between channels and similar
; operations, enabling the SQLite write-ahead log might help.
;
; To use SQLite's write-ahead log, set sqlite_wal to one of the following
; values:
;
; 0 - Use SQLite's default rollback journal.
; 1 - Use write-ahead log with synchronous=NORMAL.
; If Murmur crashes, the database will be in a consistent state, but
; the most recent changes might be lost if the operating system did
; not write them to disk yet. This option can improve Murmur's
; interactivity on busy servers, or servers with slow storage.
; 2 - Use write-ahead log with synchronous=FULL.
; All database writes are synchronized to disk when they are made.
; If Murmur crashes, the database will be include all completed writes.
;sqlite_wal=0
; If you wish to use something other than SQLite, you'll need to set the name
; of the database above, and also uncomment the below.
; Sticking with SQLite is strongly recommended, as it's the most well tested
; and by far the fastest solution.
;
;dbDriver=QMYSQL
;dbUsername=
;dbPassword=
;dbHost=
;dbPort=
;dbPrefix=murmur_
;dbOpts=
{% if murmur_database.driver is defined %}
dbDriver={{ murmur_database.driver | to_json }}
dbUsername={{ murmur_database.username | to_json }}
dbPassword={{ murmur_database.password | to_json }}
dbHost={{ murmur_database.host | default('localhost') | to_json }}
dbPort={{ murmur_database.port }}
dbPrefix={{ murmur_database.prefix | default('') | to_json }}
dbOpts={{ murmur_database.opts | default('') | to_json }}
{% endif %}
; Murmur defaults to not using D-Bus. If you wish to use dbus, which is one of the
; RPC methods available in Murmur, please specify so here.
;
;dbus=session
; Alternate D-Bus service name. Only use if you are running distinct
; murmurd processes connected to the same D-Bus daemon.
;dbusservice=net.sourceforge.mumble.murmur
; If you want to use ZeroC Ice to communicate with Murmur, you need
; to specify the endpoint to use. Since there is no authentication
; with ICE, you should only use it if you trust all the users who have
; shell access to your machine.
; Please see the ICE documentation on how to specify endpoints.
ice="tcp -h {{ murmur_ice_host | quote }} -p {{ murmur_ice_port | int }}"
; Ice primarily uses local sockets. This means anyone who has a
; user account on your machine can connect to the Ice services.
; You can set a plaintext "secret" on the Ice connection, and
; any script attempting to access must then have this secret
; (as context with name "secret").
; Access is split in read (look only) and write (modify)
; operations. Write access always includes read access,
; unless read is explicitly denied (see note below).
;
; Note that if this is uncommented and with empty content,
; access will be denied.
{% if murmur_ice_secret_read is defined %}
icesecretread={{ murmur_ice_secret_read | to_json }}
{% else %}
;icesecretread=
{% endif %}
{% if murmur_ice_secret_write is defined %}
icesecretwrite={{ murmur_ice_secret_write | to_json }}
{% else %}
;icesecretwrite=
{% endif %}
; If you want to expose Murmur's experimental gRPC API, you
; need to specify an address to bind on.
; Note: not all builds of Murmur support gRPC. If gRPC is not
; available, Murmur will warn you in its log output.
;grpc="127.0.0.1:50051"
; Specifying both a certificate and key file below will cause gRPC to use
; secured, TLS connections.
;grpccert=""
;grpckey=""
; How many login attempts do we tolerate from one IP
; inside a given timeframe before we ban the connection?
; Note that this is global (shared between all virtual servers), and that
; it counts both successfull and unsuccessfull connection attempts.
; Set either Attempts or Timeframe to 0 to disable.
;autobanAttempts = 10
;autobanTimeframe = 120
;autobanTime = 300
autobanAttempts={{ murmur_autoban_attempts }}
autobanTimeframe={{ murmur_autoban_timeframe }}
autobanTime={{ murmur_autoban_time }}
; Specifies the file Murmur should log to. By default, Murmur
; logs to the file 'murmur.log'. If you leave this field blank
; on Unix-like systems, Murmur will force itself into foreground
; mode which logs to the console.
;logfile=murmur.log
logfile={{ murmur_log_file | to_json }}
; If set, Murmur will write its process ID to this file
; when running in daemon mode (when the -fg flag is not
; specified on the command line). Only available on
; Unix-like systems.
;pidfile=
pidfile={{ murmur_pid_file | to_json }}
; The below will be used as defaults for new configured servers.
; If you're just running one server (the default), it's easier to
; configure it here than through D-Bus or Ice.
;
; Welcome message sent to clients when they connect.
; If the welcome message is set to an empty string,
; no welcome message will be sent to clients.
{% if murmur_welcome_text is string %}
welcometext={{ murmur_welcome_text | to_json }}
{% else %}
welcometext = {{ murmur_welcome_text | join('<br />') | to_json }};
{% endif %}
; Port to bind TCP and UDP sockets to.
port={{ murmur_port }}
; Specific IP or hostname to bind to.
; If this is left blank (default), Murmur will bind to all available addresses.
;host=
host={{ murmur_host | to_json }}
; Password to join server.
serverpassword={{ murmur_server_password | to_json }}
; Maximum bandwidth (in bits per second) clients are allowed
; to send speech at.
bandwidth={{ murmur_max_bandwidth }}
; Maximum number of concurrent clients allowed.
users={{ murmur_max_users }}
; Per-user rate limiting
;
; These two settings allow to configure the per-user rate limiter for some
; command messages sent from the client to the server. The messageburst setting
; specifies an amount of messages which are allowed in short bursts. The
; messagelimit setting specifies the number of messages per second allowed over
; a longer period. If a user hits the rate limit, his packages are then ignored
; for some time. Both of these settings have a minimum of 1 as setting either to
; 0 could render the server unusable.
messageburst=5
messagelimit=1
; Respond to UDP ping packets.
;
; Setting to true exposes the current user count, the maximum user count, and
; the server's maximum bandwidth per client to unauthenticated users. In the
; Mumble client, this information is shown in the Connect dialog.
allowping=true
; Amount of users with Opus support needed to force Opus usage, in percent.
; 0 = Always enable Opus, 100 = enable Opus if it's supported by all clients.
;opusthreshold=100
opusthreshold={{ murmur_opus_threshold }}
; Maximum depth of channel nesting. Note that some databases like MySQL using
; InnoDB will fail when operating on deeply nested channels.
;channelnestinglimit=10
channelnestinglimit={{ murmur_channel_nesting_limit }}
; Maximum number of channels per server. 0 for unlimited. Note that an
; excessive number of channels will impact server performance
;channelcountlimit=1000
channelcountlimit={{ murmur_channel_count_limit }}
; Regular expression used to validate channel names.
; (Note that you have to escape backslashes with \ )
;channelname=[ \\-=\\w\\#\\[\\]\\{\\}\\(\\)\\@\\|]+
{% if murmur_channel_name_regex is defined %}
channelname={{ murmur_channel_name_regex }}
{% endif %}
; Regular expression used to validate user names.
; (Note that you have to escape backslashes with \ )
;username=[-=\\w\\[\\]\\{\\}\\(\\)\\@\\|\\.]+
{% if murmur_username_regex is defined %}
username={{ murmur_username_regex }}
{% endif %}
; Maximum length of text messages in characters. 0 for no limit.
;textmessagelength=5000
textmessagelength={{ murmur_text_message_max_length }}
; Maximum length of text messages in characters, with image data. 0 for no limit.
;imagemessagelength=131072
imagemessagelength={{ murmur_image_message_max_length }}
; Allow clients to use HTML in messages, user comments and channel descriptions?
;allowhtml=true
allowhtml={{ murmur_allow_html }}
; Murmur retains the per-server log entries in an internal database which
; allows it to be accessed over D-Bus/ICE.
; How many days should such entries be kept?
; Set to 0 to keep forever, or -1 to disable logging to the DB.
;logdays=31
logdays={{ murmur_log_days }}
{% if murmur_register_enabled %}
; To enable public server registration, the serverpassword must be blank, and
; this must all be filled out.
; The password here is used to create a registry for the server name; subsequent
; updates will need the same password. Don't lose your password.
; The URL is your own website, and only set the registerHostname for static IP
; addresses.
; Only uncomment the 'registerName' parameter if you wish to give your "Root" channel a custom name.
;
registerName={{ murmur_register.name | to_json }}
registerPassword={{ murmur_register.password | to_json }}
registerUrl={{ murmur_register.url | to_json }}
registerHostname={{ murmur_register.hostname | to_json }}
{% endif %}
; If this option is enabled, the server will announce its presence via the
; bonjour service discovery protocol. To change the name announced by bonjour
; adjust the registerName variable.
; See http://developer.apple.com/networking/bonjour/index.html for more information
; about bonjour.
;bonjour=True
bonjour={{ murmur_bonjour_enabled }}
; If you have a proper SSL certificate, you can provide the filenames here.
; Otherwise, Murmur will create its own certificate automatically.
;sslCert=
;sslKey=
sslCert={{ murmur_certificate | to_json }}
sslKey={{ murmur_private_key | to_json }}
{% if acme_enabled %}
sslCa={{ murmur_trusted_certificate | to_json }}
{% endif %}
; The sslDHParams option allows you to specify a PEM-encoded file with
; Diffie-Hellman parameters, which will be used as the default Diffie-
; Hellman parameters for all virtual servers.
;
; Instead of pointing sslDHParams to a file, you can also use the option
; to specify a named set of Diffie-Hellman parameters for Murmur to use.
; Murmur comes bundled with the Diffie-Hellman parameters from RFC 7919.
; These parameters are available by using the following names:
;
; @ffdhe2048, @ffdhe3072, @ffdhe4096, @ffdhe6144, @ffdhe8192
;
; By default, Murmur uses @ffdhe2048.
sslDHParams={{ murmur_dhparam | to_json }}
; The sslCiphers option chooses the cipher suites to make available for use
; in SSL/TLS. This option is server-wide, and cannot be set on a
; per-virtual-server basis.
;
; This option is specified using OpenSSL cipher list notation (see
; https://www.openssl.org/docs/apps/ciphers.html#CIPHER-LIST-FORMAT).
;
; It is recommended that you try your cipher string using 'openssl ciphers <string>'
; before setting it here, to get a feel for which cipher suites you will get.
;
; After setting this option, it is recommend that you inspect your Murmur log
; to ensure that Murmur is using the cipher suites that you expected it to.
;
; Note: Changing this option may impact the backwards compatibility of your
; Murmur server, and can remove the ability for older Mumble clients to be able
; to connect to it.
;sslCiphers=EECDH+AESGCM:EDH+aRSA+AESGCM:DHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA:AES256-SHA:AES128-SHA
; If Murmur is started as root, which user should it switch to?
; This option is ignored if Murmur isn't started with root privileges.
;uname=
uname={{ murmur_owner }}
; If this options is enabled, only clients which have a certificate are allowed
; to connect.
;certrequired=False
certrequired={{ murmur_client_certificate_required }}
; If enabled, clients are sent information about the servers version and operating
; system.
;sendversion=True
sendversion={{ murmur_send_server_version }}
; This sets password hash storage to legacy mode (1.2.4 and before)
; (Note that setting this to true is insecure and should not be used unless absolutely necessary)
;legacyPasswordHash=false
; By default a strong amount of PBKDF2 iterations are chosen automatically. If >0 this setting
; overrides the automatic benchmark and forces a specific number of iterations.
; (Note that you should only change this value if you know what you are doing)
;kdfIterations=-1
; You can configure any of the configuration options for Ice here. We recommend
; leave the defaults as they are.
; Please note that this section has to be last in the configuration file.
;
[Ice]
Ice.Warn.UnknownProperties={{ murmur_ice_warn_unknown_properties | int }}
Ice.MessageSizeMax={{ murmur_ice_message_size_max }}